Grid connection applications, grid code compliance and the power system studies needed to connect PV and storage plants and keep them connected.
- Grid connection applications and liaison with the network operator
- Grid code compliance assessment and compliance test support
- Load flow, short-circuit, reactive power and voltage studies
- Harmonics, flicker and power quality assessment
- Protection coordination and earthing studies
The grid connection is usually the constraint that shapes the plant. Getting it right early avoids redesign later, and getting the compliance evidence right avoids delays at energisation.
Connection
We prepare grid connection applications and the technical information the network operator needs, and we represent the client in the technical discussions that follow. Where the connection offer includes constraints such as export limits, reactive power ranges or ramp-rate limits, we translate them into design requirements for the plant and its control system.
Studies
Load flow and short-circuit studies size the plant’s electrical equipment and confirm the connection can accept it. Reactive power and voltage studies confirm the plant can meet the grid code at the point of connection. Harmonic and flicker assessments cover inverter-based plants where the network operator requires them. Protection coordination and earthing studies complete the package for energisation.
Compliance
Grid codes for inverter-based generation and storage change often and differ by country. We maintain a compliance matrix for each project, support the contractor’s compliance simulations, and witness the site tests that demonstrate compliance to the operator.
Storage
Battery plants are dispatched in both directions and are increasingly expected to provide grid services: frequency response, fast reserve, voltage support, black start. We assess what the plant can offer, what the grid code requires and how the energy management system must be configured. See battery storage.
Other services
Tell us about the project
Most engagements start with a short call about what you are trying to decide. We will tell you what we would do, what it would cost, and whether you need us at all.